Sun4/I - Removable Media - 150MB 1/4" Tape Drive
Caratteristiche
Capacita' 150M
Formato QIC150 Sito QIC
Interfaccia SCSI
150MB 1/4" Tape Drive
Sun-4/330/370/390/470/490 SS630MP / SS670MP / SS690MP / SC2000
Options 539 / 565 / 660
370-1205 |
370-1206 |
370-1218 |
370-1246 |
Archive 2150S Half-Height Black Bezel |
Archive 2150S Full-Height Black Bezel |
Archive 2150S Half-Height Custom Bezel |
Archive 2150S Full-Height Lt Grey Bezel |
Rear View

Flex Cable
 |
In the Desktop Tape Pack, remove the SCSI ID jumpers, orient the
Flex Cable as shown, and plug it into the SCSI ID jumper block. |
Address Select Switch Cable
 |
In the External Storage Module, orient the Address Select Switch
Cable as shown, and plug it into the SCSI ID jumper block. |
Power
- 0.7 Amps @ +5Vdc
- 1.5 Amps @ +12Vdc
- 21.5 Watts
Jumper Settings
JUMPER |
SETTING |
DESCRIPTION |
USAGE |
RXD/TXD |
Out |
Serial Port |
Not used |
DIAG Parity |
Out Out* |
Normal/Diag Parity check |
Not used Not used |
CF2,CF1,CF 0 |
In |
Disconnect Transfer Size |
Size = 32K |
JUMPER |
TARGET 2 |
TARGET 3 |
TARGET 4 |
TARGET 5 |
ID2 |
Out |
Out |
In |
In |
ID1 |
In |
In |
Out |
Out |
ID0 |
Out |
In |
Out |
In |
1st SCSI |
st3 |
st2 |
st0 |
st1 |
2nd SCSI |
st7 |
st6 |
st2, st4 |
st3, st5 |
* IN for 370-1246
Note
- The Cartridge Tape part number is 370-1203-01.
Reference
- 150MB 1/4-Inch Cartridge Tape Drive Configuration Manual for the
56-Inch Data Center Cabinet, 813-2076.
Last updated: December 2, 1996
|
|
 |  |
|